Emulsifiers » Cutting Oil

Cutting Oil (GRADES : EX (Contains phenolic biocides) & CX (Meets cast ironcorrosion test))

Introduction / Specification :
Eastern Petroleum Private Limited manufactures a fully formulated high performance emulsifier package, Cutting Oil, to make soluble cutting oil concentrate in a wide range of paraffinic base stocks to be used for general purpose metal working applications. Approximately 18 - 20 % Cutting Oil Emulsifier is blended with suitable paraffinic base stocks as per the need of the applications. Soluble cutting oil concentrate made from Cutting Oil provides spontaneous emulsion formation with good stability for longer duration even with hard water, excellent rust and corrosion prevention, protection against microbial attack and impart reasonably good extreme pressure property.

Application / Composition :
Recommended for variety of general purpose machining operations for ferrous and non-ferrous metals.

Performance Level :
Meet BIS-1115 - 1986 Specification.

Typical Properties :
CHARACTERISTICS Cutting Oil
EX CX
Appearance Dark Viscous Liquid Dark Viscous Liquid
Specific Gravity at 15.6ºC 1.00 - 1.05 1.00 - 1.05
K. Viscosity at 100ºC, cSt 30 30
Emulsion Test (1:20 & 1:50 dilutions) Passes Passes
pH of 5 % Emulsion 9.0 - 9.50 9.0 - 9.50

Additional Advantages : Following are the additional advantages for soluble cutting oil concentrate blended from:
Cutting Oil :
  1. Good cooling and lubricating properties.
  2. Good thermal stability.
  3. No foaming.
  4. No staining.
  5. Not harmful to operators.
  6. Extended tool life .
  7. Better finish for the machined parts / components.
Date of Issue : DKG /28.05.2009
PDS No. 50200/1
Send
Enquiry
Download
MSDS
Download
PDS
Download
Brochure




Cutting Oil EX & CX (GRADES : EX (Contains phenolic biocides) & CX (Meets cast iron corrosion test))

Introduction / Specification:
Eastern Petroleum Private Limited manufactures a fully formulated high performance emulsifier package, Cutting Oil, to make soluble cutting oil concentrate in a wide range of paraffinic base stocks to be used for general purpose metal working applications. Approximately 18 - 20 % Cutting Oil Emulsifier is blended with suitable paraffinic base stocks as per the need of the applications. Soluble cutting oil concentrate made from Cutting provides spontaneous emulsion formation with good stability for longer duration even with hard water, excellent rust and corrosion prevention, protection against microbial attack and impart reasonably good extreme pressure property.

Application / Composition :
Recommended for variety of general purpose machining operations for ferrous and non-ferrous metals.

Performance Level :
Meet BIS-1115 - 1986 Specification.

Typical Properties :
CHARACTERISTICS Cutting Oil EX AND CX
EX CX
Appearance Dark Viscous Liquid Dark Viscous Liquid
Specific Gravity at 15.6ºC 1.00 - 1.05 1.00 - 1.05
K. Viscosity at 100ºC, cSt 30 30
Emulsion Test (1:20 & 1:50 dilutions) Passes Passes
pH of 5 % Emulsion 9.0 - 9.50 9.0 - 9.50

Additional Advantages : Following are the additional advantages for soluble cutting oil concentrate blended from :
Cutting Oil EX & CX :
  1. Good cooling and lubricating properties.
  2. Good thermal stability.
  3. No foaming.
  4. No staining.
  5. Not harmful to operators.
  6. Extended tool life .
  7. Better finish for the machined parts / components.
Date of Issue : DKG /28.05.2009
PDS No. 50200/1
Send Enquiry
Download MSDS
Download PDS



Cutting CL (GRADES: CONKUT CL)

Introduction / Specification :
Cutting CL is a translucent type of emulsion with water having the advantage of visibility of work piece and tool during machining. This special purpose soluble cutting oil contains special additives for rust and corrosion inhibitors with biocides to prevent the bacterial growth in the emulsion. The oil has excellent cooling and lubricating properties which impart good surface finish and ensures the long tool life.

Application / Composition :
Cutting CL is suitable for variety of cutting operations of ferrous and non-ferrous metals where emulsifiable oil are normally used. The oil is normally used in the concentration of 5 to 10 % depending on the severity of machining.

Performance Level :
Cutting CL meets the requirements of IS-1115-1986 (Re-affirmed 1991).

Typical Properties :
TYPICAL PROPERTIES Cutting CL
Kinematic Viscosity at 40°C., cSt, 200
Flash Point, COC,°C 150
Frothing Test Passes
Emulsion Test Passes

Packing : 210 Litres Drums
Date of Issue : DKG/22.12.2008
PDS No. 50210
Send Enquiry
Download PDS

Cutting Oil is Used / Needs in Machine Tool Industries Applications / Uses as below:

Vertical Machining Centres, Guiding, CNC Machining Centre, CNC rotating tool holder, Ball Bar Test, Punching, Angle Shearing, Flat Shearing,
Notching, Bar Shearing, Conventional Lathe, CNC engraving and milling machine, Radial drilling machine, Nut former machine, CNC Flexible Horizontal machining centre, CNC/Conventional, Fine Boring, Line Boring, Rotary indexing, Valve seat Generation & Gun Reaming, Multi-spindle drilling, Milling, Head changers, Internal spline Broaching, Gear Chamfering, Surface Broaching, Machine lines for Cylinder Block & head, Connecting Rod, CNC Turning, CNC boring, facing and drilling machine, Hydraulic punching and shearing machine, Hydraulic Press, Hydraulic power pack - for Hydraulic Oils, CNC Gear Tooth Grinding, Knurling Tool wheels, Knives - circular, friction saw blades, segmental saw blades, Dyes and mould, Forming tools, Honing machine, Gun drilling machine, Multi – Spindle Drilling, Milling, Head Changes, EDM, CNC centering and facing machine, Honing machine, horizontal, Fine boring machine, Cold define machine, CNC double column Plano drilling machine

Metal Working Fluid » Soluble Cutting Oil


Introduction / Specification :
Soluble Cutting Oil is a type of coolant and lubricant designed specifically for metalworking and machining processes. There are various kinds of cutting fluid, which include oils, oil-water emulsions, pastes, gels, and mists. They may be made from petroleum distillates, animal fats, plant oils, or other raw ingredients. Depending on context and on which type of cutting fluid is being considered, it may be referred to as Soluble Cutting Fluid, Soluble Cutting Oil, Soluble Cutting compound, Soluble Cutting Fluid Coolant, or Soluble Cutting Fluid Lubricant.



Send Enquiry



SYN GR Fluid 2,5,12 (GRADES: 2,5,12)

Introduction / Specification :
Syn Gr Fluid 2, 5 & 12 are water soluble synthetic grinding fluid of solution type. They are supplied in a concentrated form and are to be diluted with water in a suitable ratio. They are free from any mineral oil or fatty matter. These products are economical with good cooling and remarkable antirust properties when applied in grinding and other high speed machining operations.

Application / Composition :
Syn Gr Fluid 2, 5 & 12 are specially recommended for grinding of ferrous metals, specially for grinding of open grain cast irons which tends to rust quickly after Machining, high nickel and titanium alloys. Easto Syn Gr Fuids 2, 5 & 12 is recommended for grinding operations of Iron, Steel, Non-alloyed Steels and Nickel Chromium Steels. It should not be used for grinding aluminum, zinc, copper or magnesium alloys, tin or cadmium coated parts. Dilution range for the products varies from 1:40 min. to 1:100 max. Higher concentrations than required do not give production benefits but may lead to slight discolouration of workers skin.

Performance Level :
Besides rendering remarkable antirust properties, Syn Gr Fuids 2, 5 & 12 give longer service life to grinding wheels and good ground finish. They do not emanate obnoxious odour even when machine is shut down and fluid is not kept in circulation as they are not attacked by bacteria. The solution maintains the clarity throughout the service period. They remove grinding debris quickly and keep the wheel exceptionally clean. They do not give skin irritation when used in proper dilution range.

Performance Standard :
Syn Gr Fluid 2, 5 & 12 meet IS: 11186 -1985 reaffirmed March, 2002 standards.

Typical Properties :
CHARACTERISTICS Syn Gr Fluids 2 Syn Gr Fluids 5 Syn Gr Fluids 12
Appearance of 10 % volume in Distilled Water Clear liquid with Green Fluorescence Clear liquid with Green Fluorescence Clear liquid with Green Fluorescence
Density at 15°C, gm/ml 1.200 (typical) 1.220 (typical) 1.260 (typical)
pH of 2 % Volume in Distilled Water 9.50 (typical) 9.50 (typical) 9.50 (typical)
Cast iron corrosion test in 1:40 Distilled Water. Passes Passes Passes

Send Enquiry
Download PDS
Download Brochure



Grades - EASTTO KUT CX, PCX

Introduction / Specification :
Eastto Soluble Cutting oils are specially designed metal working fluids containing extreme pressure additives that offers optimum performance under most difficult machining operations. These can be used on both ferrous and non ferrous metals in variety of operations. These products provide extended tool life, superior surface finishing and excellent heat dissipation characteristics.

Application / Composition :
It is recommended for a variety of cutting operations on ferrous and non ferrous metals, the application includes Grinding, Milling Drilling, Turning, Boring, Punching, Reaming, Broaching and Tapping operations. It is also used in machine tool industries like Radial drilling machine,

Conventional lathe, CNC rotating tool holder, CNC machining centre, Angle shearing and vertical machining centre.

Benefits :
• Outstanding emulsifying properties
• Resists oil separation
• Long oil service life
• Delivers excellent protection to both tools and work pieces against rust and corrosion
• High lubricity
• Improved surface finish
• Low foaming tendency
• Extends tool life
Send Enquiry
Download MSDS
Download MSDS
Download PDS

Soluble Cutting Oil is Used / Needs in Machine Tool Industries Applications / Uses as below :

Vertical Machining Centres, Guiding, CNC Machining Centre, CNC rotating tool holder, Ball Bar Test, Punching, Angle Shearing, Flat Shearing, Notching, Bar Shearing, Conventional Lathe, CNC engraving and milling machine, Radial drilling machine, Nut former machine, CNC Flexible Horizontal machining centre, CNC/Conventional, Fine Boring, Line Boring, Rotary indexing, Valve seat Generation & Gun Reaming, Multi-spindle drilling, Milling, Head changers, Internal spline Broaching, Gear Chamfering, Surface Broaching, Machine lines for Cylinder Block & head, Connecting Rod, CNC Turning, CNC boring, facing and drilling machine, Hydraulic punching and shearing machine, Hydraulic Press, Hydraulic power pack - for Hydraulic Oils, CNC Gear Tooth Grinding, Knurling Tool wheels, Knives - circular, friction saw blades, segmental saw blades, Dyes and mould, Forming tools, Honing machine, Gun drilling machine, Multi – Spindle Drilling, Milling, Head Changes, EDM, CNC centering and facing machine, Honing machine, horizontal, Fine boring machine, Cold define machine, CNC double column Plano drilling machine

Soluble Cutting Oil / Oils Other relevant terms: Soluble cutting oil, Cutting oil, Grinding Fluid, Cutting Fluid, Grinding fluid, Cutting tool, Machining Processes, Heavy duty soluble oil, Lubricity, Semi synthetic cutting fluid, Turning, Milling operations, SYN GR Fluid, Semi Synthetic Cutting Oil, Soluble Cutting Fluid, Soluble Cutting Compound, Soluble Cutting Fluid Coolant, Soluble Cutting Fluid Lubricant, Drilling of various machine parts.


Metal Working Fluid » Semi Synthetic Oil

Send
Enquiry
Download
MSDS
Download
PDS
Download
Brochure




Grade - EASTTO SEMI SYNTH CUTTING OIL

Introduction / Specification:
EASTTO SEMI SYNTHETIC CUTTING OIL is heavy duty high performance metal working fluid based on semi synthetic technology, formulated with latest chemical innovations for lubricity, wetting and corrosion prevention properties. It contains Extreme pressure additives and frictional modifier that offers extended tool life, improved surface finishing, heat dissipation and better emulsion service life. It provides extensive cooling for heavy machining operation. It is designed to prevent rusting by forming a thin coating layer on the finish component for relatively long period

Application / Composition :
It is recommended for the machining of ferrous and non ferrous metals and the applications include Grinding, Milling Drilling, Turning, Boring, Punching, Reaming, Broaching, Notching and Tapping. It is also used in machine tool industries, Radial drilling machine, Conventional lathe, CNC rotating tool holder, CNC machining centre, Milling machine, flat shearing, Angle shearing and vertical machining centres.

Benefits :
• Free from Nitrites, Phenols and sulfurized EP additives.
• Effective bactericidal and fungicidal system provides higher bio resistance to microbial degradation.
• Compatible with a wide range of materials including ferrous, nonferrous and non metallic materials.
• Excellent cooling properties and extreme pressure lubricity combines to provide extended tool life.
• Improved surface finish.
• Reduces friction and heat between tool and work piece.
• Better operator’s acceptance.
• Keeps machine and work environment clean even when machining or grinding of gray iron.

Send Enquiry



Grade - EASTTO SYN GR FLUIDS 2, 5, 12

Introduction / Specification:
Eastto synthetic Grinding Fluids are mineral oil free synthetic fluid designed for machining and grinding operations to fulfil customer’s primary requirement of high surface finish, cooling and low foam. This series contains excellent corrosion inhibitor and lubricity packages that provides excellent performance in machining and grinding operations of ferrous and non ferrous metals. They offer outstanding tramp-oil rejection, producing exceptional levels of cleanliness on both the machine tool and work piece surfaces. Formulated with balanced and effective biocide packages, our synthetic coolants offer outstanding sump life performance which translates into greater value for our customers.



Application / Composition :
It is recommended for the machining and grinding operations of ferrous and non ferrous metals. It can be use for Milling, Drilling, Turning, Boring, Punching, Reaming, Broaching, Notching and Tapping operations. It is also used in machine tool industries, Radial drilling machine, Conventional lathe, CNC rotating tool holder, CNC machining centre, Milling machine, flat shearing, Angle shearing and vertical machining centres.

Benefits :
• Resists formation of sticky residues
• Excellent corrosion protection
• Improves filterability and surface finish
• Easy separation and removal of tramp oil
• Improves machine cleanliness
• Improved performance even in high pressure systems
• Low foaming

Send Enquiry


Semi synthetic Oil is Used / Needs in Machine Tool Industries Applications / Uses as below:

Vertical Machining Centres, Guiding, CNC Machining Centre, CNC rotating tool holder, Ball Bar Test, Punching, Angle Shearing, Flat Shearing, Notching, Bar Shearing, Conventional Lathe, CNC engraving and milling machine, Radial drilling machine, Nut former machine, CNC Flexible Horizontal machining centre, CNC/Conventional, Fine Boring, Line Boring, Rotary indexing, Valve seat Generation & Gun Reaming, Multi-spindle drilling, Milling, Head changers, Internal spline Broaching, Gear Chamfering, Surface Broaching, Machine lines for Cylinder Block & head, Connecting Rod, CNC Turning, CNC boring, facing and drilling machine, Hydraulic punching and shearing machine, Hydraulic Press, Hydraulic power pack - for Hydraulic Oils, CNC Gear Tooth Grinding, Knurling Tool wheels, Knives - circular, friction saw blades, segmental saw blades, Dyes and mould, Forming tools, Honing machine, Gun drilling machine, Multi – Spindle Drilling, Milling, Head Changes, EDM, CNC centering and facing machine, Honing machine, horizontal, Fine boring machine, Cold define machine, CNC double column Plano drilling machine

Metal Working Fluid » Neat Cutting Oil

Neat Cutting Oil 137 (GRADES: ISO VG 32 )

Introduction / Specifications :
Neat Cutting Oil 137 is staining type neat cutting oils manufactured from highly refined virgin base stocks of medium viscosity and fatty oils for improved wetting characteristics to impart good heat dissipation characteristics, and also with active sulphur and chlorinated additive to impart EP properties. Its light colour provides good visibility of machining operations.

Application / Composition :
Neat Cutting Oil 137 is recommended for heavy duty applications like gear hobbing, thread cutting, less severe machining operations on high tensile steel, stainless steel and some alloys.


Performance Level : Neat Cutting Oil 137 is a proprietary product.

Typical Properties :
TYPICAL PROPERTIES Neat Cutting Oil 137
32 - 42
Kinematic Viscosity at 40°C., cSt
Flash Point, COC, °C 160
Copper Strip Corrosion, 3 Hrs / 100°C. 4
Sap Value, mg KOH/gm. 5

Packing of Neat Cutting Oil 137 : 210 Litres Drum.
Date of issue: DKG/20.08.2008
PDS No. 50299
Send Enquiry
Download MSDS
Download PDS
Download Brochure



Neat Cutting Oil 222 (GRADES:ISO VG 22)

Introduction / Specifications :
Neat Cutting Oil 222 is non-staining type neat cutting oil manufactured from highly refined virgin base stocks and fatty oils for improved wetting characteristics to impart good heat dissipation characteristics. Its light colour provides good visibility of machining operations

Application / Composition :
Neat Cutting Oil 222 is recommended for machining ferrous and non-ferrous of less severe nature and also for free cutting of mild steel and drawing of non-ferrous rods as well as tubing etc.

Performance Level :
Neat Cutting Oil 222 meets IS: 3065-1985, Type I, Grade 2.

Typical Properties :
TYPICAL PROPERTIES Neat Cutting Oil 222
22 (typical)
Kinematic Viscosity at 40°C, cSt
Flash Point, COC, °C 160 (typical)
Copper Strip Corrosion, 3 Hrs / 100°C 1
Saponification No., mg KOH/gm. 18

Packing : 210 Litres Drums.
Date of issue: DKG/20.08.2008
Send
Enquiry
Download
MSDS
Download
PDS
Download
Brochure




Neat Cutting Oil 333 (GRADES: VG 32)

Introduction / Specifications :
Neat Cutting Oil 333 contains fatty oil and inactive sulphur prooven additives to improve machinability with wide range of operations. With the reduction of wearing of tool, Neat Cutting Oil 333 gives better surface finish without discolouration of the components.

Application / Composition :
Neat Cutting Oil 333 is recommended for multipurpose machining operations of ferrous and non-ferrous metals where severity of machining is not encountered.

Performance Level :
Neat Cutting Oil 333 meets IS: meets the requirement of IS 3065- 1985, TYPE II, Grade 3 (RE-AFFIRMD 1995)

Typical Properties :
TYPICAL PROPERTIES Neat Cutting Oil 333
32 (typical)
Kinematic Viscosity at 40°C., cSt
Flash Point, °C. (COC) 170 (typical)
Copper Strip Corrosion, 3 Hrs / 100°C. 1
Sap Value, mg KOH / gm. 4

Packing : 210 Litres Drum.
Date of issue: DKG/ 8-Aug-09
Send
Enquiry
Download
MSDS
Download
PDS
Download
Brochure




Neat Cutting Oil 442 (GRADES:VG 46)

Introduction / Specifications :
Neat Cutting Oil 442 contains sulphurised fat and chlorinated prooven additives to impart extreme pressure property to cutting operations of low speeds at low/moderate temperature.

Application / Composition :
Neat Cutting Oil 442 is recommended for multipurpose machining operations of ferrous and non-ferrous metals without discolouration, e.g., gear hobbing and shaving, screw cutting, tapping, milling reaming etc.

Performance Level :
Neat Cutting Oil 442 Proprietary

Typical Properties :
TYPICAL PROPERTIES Neat Cutting Oil 442
46 -60
Kinematic Viscosity at 40°C., cSt
Flash Point, °C. (COC) 180
Copper Strip Corrosion, 3 Hrs / 100°C. 1
Sap Value, mg KOH / gm. 4

Packing : 210 Litres Drums.
Date of issue: DKG/26.09.2008
Send
Enquiry
Download
MSDS
Download
PDS
Download
Brochure




Neat Cutting Oil 433 (GRADES: VG 32)

Introduction / Specifications :
Neat Cutting Oil 433 contains sulphurised fat and chlorinated prooven additives to impart extreme pressure property to cutting operations of low speeds at low/moderate temperature.

Application / Composition :
Neat Cutting Oil 433 is recommended for multipurpose machining operations of ferrous and non-ferrous metals without discolouration, e.g., gear hobbing and shaving, screw cutting, tapping, milling reaming etc.

Performance Level :
Neat Cutting Oil 433 Proprietary

Typical Properties :
TYPICAL PROPERTIES Neat Cutting Oil 433
30 - 36
Kinematic Viscosity at 40°C., cSt
Flash Point, °C. (COC) 170
Copper Strip Corrosion, 3 Hrs / 100°C. 1
Sap Value, mg KOH / gm 4

Packing : 210 Litres Drum
Date of issue: DKG/ 8-Aug-09
Send
Enquiry
Download
MSDS
Download
PDS
Download
Brochure




Neat Cutting Oil 522 (GRADES: VG 22)

Introduction / Specifications :
Neat Cutting Oil 522 contains fatty oil and chlorinated prooven additives to improve machinability with reduction of wearing of tool life and gives better surface finish without discolouration of the components.

Application / Composition :
Neat Cutting Oil 522 is recommended for multipurpose machining operations of ferrous and non-ferrous metals including different grinding and milling operations.

Performance Level : Neat Cutting Oils 522 meets the requirement of IS 3065-1985, TYPE I, Grade 2 (RE-AFFIRMD 1995)

Typical Properties :
TYPICAL PROPERTIES Neat Cutting Oil 522
220 - 24
Kinematic Viscosity at 40°C., cSt
Flash Point, °C. (COC) 160
Copper Strip Corrosion, 3 Hrs / 100°C. 1
Sap Value, mg KOH / gm. 7

Packing : 210 Litres Drums.
Date of issue: DKG/ 8-Aug-09
Send
Enquiry
Download
MSDS
Download
PDS
Download
Brochure




Neat Cutting Oil 611 (GRADES: VG 12)

Introduction / Specifications :
Neat Cutting Oil 611 contains specially selected fatty material and active sulphur to impart extra ability of cutting operations under continuous and long working periods. Neat Cutting Oil 611 has minimum tendency of mist forming and increases the life of filter due to low tendency of sludge formation.

Application / Composition :
Neat Cutting Oil 611 is recommended for deep hole boring and drilling including gun drilling operations where easy swarf removal and effective cooling at the cutting point are required. Neat Cutting Oil 611 is not recommended for use on non-ferrous metals.

Performance Level : Neat Cutting Oil 611 Proprietary

Typical Properties :
TYPICAL PROPERTIES Neat Cutting Oil 611
10-12
Kinematic Viscosity at 40°C., cSt
Flash Point, °C. (COC) 130
Copper Strip Corrosion, 3 Hrs / 100°C. 4
Sap Value, mg KOH / gm. 14

Packing : 210 Litres Drums.
Date of issue: DKG/01.8.8.2009
Send
Enquiry
Download
MSDS
Download
PDS
Download
Brochure




Neat Cutting Oil 747 (GRADES: VG 46)

Introduction / Specifications :
Neat Cutting Oil 747 is special non-staining type neat cutting oil with very high wetting property. Because of its excellent ability to release foam, Neat Cutting Oil 747 prevents over heating of the work piece by eliminating the possible metal distortion.

Application / Composition :
Neat Cutting Oil 747 is recommended for both ferrous and non-ferrous metal for various grinding operations, turning broaching etc.

Performance :
Neat Cutting Oil 747 Proprietary Grade.

Typical Properties :
TYPICAL PROPERTIES Neat Cutting Oil 747
44 - 50
Kinematic Viscosity at 40°C., cSt
Flash Point, °C. (COC) 170
Copper Strip Corrosion, 3 Hrs / 100°C. 1
Sap Value, mg KOH / gm. 7

Packing : 210 Litres Drums.
Date of issue: DKG/ 8-Aug-09
Send
Enquiry
Download
MSDS
Download
PDS
Download
Brochure




Neat Cutting Oil 832 (GRADES: VG 32)

Introduction / Specifications :
Neat Cutting Oil 832 contains active and non-active sulphur to give better surface finish and longer cutting tool life over a wide range of operating temperatures.

Application / Composition :
Neat Cutting Oil 832 is recommended for machining operations of high tensile stainless steel, nickel-chromium alloys, gear cutting, hobbing, drilling, reaming, thread cutting machines. The product is not recommended for use on non-ferrous metals.

Performance Level : Neat Cutting Oil 832 meets the requirement of IS 3065-1985, TYPE III, Grade 2 (RE-AFFIRMD 1995)

Typical Properties :
TYPICAL PROPERTIES Neat Cutting Oil 832
30 – 34
Kinematic Viscosity at 40°C., cSt
Flash Point, °C. (COC) 160
Copper Strip Corrosion, 3 Hrs / 100°C. 4
Sap Value, mg KOH / gm. 5

Packing : 210 Litres Drums.
Date of issue: DKG/ 8-Aug-09
Send
Enquiry
Download
MSDS
Download
PDS
Download
Brochure




Neat Cutting Oil 932 (GRADES: VG 32)

Introduction / Specification:
Neat Cutting Oil 932 contains active and non-active sulphur, fatty oil and chlorinated prooven additives to give better surface finish and longer cutting tool life over a wide range of operating temperatures by providing an excellent lubricating film.

Application / Composition :
Neat Cutting Oil 932 is recommended for machining operations of gear cutting, broaching and threading of alloy and stainless steels. The product is not recommended for use on non-ferrous metals.

Performance : Easto Neat Cutting Oil 932 meets the requirement of IS 3065-1985, TYPE III, Grade 2 (RE-AFFIRMD 1995)

Typical Properties :
TYPICAL PROPERTIES Neat Cutting Oil 932
34 - 40
Kinematic Viscosity at 40°C., cSt
Flash Point, °C. (COC) 160
Copper Strip Corrosion, 3 Hrs / 100°C. 4
Sap Value, mg KOH / gm. 10

Packing : 210 Litres Drums.
Date of issue: DKG/ 8-Aug-09
Send
Enquiry
Download
MSDS
Download
PDS
Download
Brochure




Grades - EASTTO NEAT CUTTING OIL 137, 222, 333, 442, 443, 522, 611,747, 832, 932

Introduction / Specification:
EASTTO NEAT CUTTING OILS promotes the variety of extreme pressure lubricants with the viscosity of your choice for the most difficult machining operations. Our neat cutting oil performs with less smoke, better surface finishing and improved tool life that equals to the less down time and lower operating cost.

Application / Composition :
EASTTO NEAT CUTTING OILS are recommended for machining operations like Hobbing, Broaching, Gun drilling, Gun reaming, Gear shaving, Fine and line boring, Punching, Radial drilling, Tapping, Milling, Spline hob cutting, Multi spindle drilling etc for ferrous and non-ferrous metals. It is also used for rotary indexing, Angle shearing, Nut forming machine,

CNC engraving and milling machine, Bar shearing, Machine tool industries and Conventional lathe machine.

Benefits :
• Reduces friction and heat between tool and work piece
• Prevents excessive wear at contact surfaces
• Improves surface finish
• Extends tool life
• Facilitates rapid settling of chips and swarf
• Lowers power consumption
• Prevents welding and “built-up edge” on cutting tools

Send Enquiry

Neat Cutting Oil is Used / Needs in Machine Tool Industries Applications / Uses as below:

Vertical Machining Centres, Guiding, CNC Machining Centre, CNC rotating tool holder, Ball Bar Test, Punching, Angle Shearing, Flat Shearing, Notching, Bar Shearing, Conventional Lathe, CNC engraving and milling machine, Radial drilling machine, Nut former machine, CNC Flexible Horizontal machining centre, CNC/Conventional, Fine Boring, Line Boring, Rotary indexing, Valve seat Generation & Gun Reaming, Multi-spindle drilling, Milling, Head changers, Internal spline Broaching, Gear Chamfering, Surface Broaching, Machine lines for Cylinder Block & head, Connecting Rod, CNC Turning, CNC boring, facing and drilling machine, Hydraulic punching and shearing machine, Hydraulic Press, Hydraulic power pack - for Hydraulic Oils, CNC Gear Tooth Grinding, Knurling Tool wheels, Knives - circular, friction saw blades, segmental saw blades, Dyes and mould, Forming tools, Honing machine, Gun drilling machine, Multi – Spindle Drilling, Milling, Head Changes, EDM, CNC centering and facing machine, Honing machine, horizontal, Fine boring machine, Cold define machine, CNC double column Plano drilling machine, Gear shaving, Radial drilling, Tapping, Spline Hob Cutting, Rotary indexing, Angle shearing, Machine tool industries, Conventional lathe machine, Gear hobbing, Spline hob cutting, Surface broaching, Gear tooth grinding.

Neat Cutting Oil / Oils Neat Cutting oils mostly used / needs for processes like Cutting, Hobbing, Brouching, Gun drilling, Deep hole drilling, Spline hob cutters in machine tool industry on new machines and old second hand machines / machineries.

Metal Working Fluid »Straight Cutting Oil

Straight Cutting Oil


Introduction / Specification :
Straight Cutting Oils are blended from High Viscosity Index Base Stock containing Sulphurised Fat or Chlorinated Compound and Sulphur, either active or non active type depending upon type of Metal / Cutting Operation involved. Recommended for Cutting, Grinding, Milling, Deep Hole Boring, Drilling, Gear Shaving, Gear Hobbing, Screw Cutting etc. These Oils reduces tool wear and improves machinability.

EASTO FIN: These oils are blended from low viscosity High Viscosity Index Base Stocks containing special Fatty Material and active Sulphur to provide extra cutting assistance. Grade 22 contains Chlorinated Fatty Material, which reduces Tool Wear and improves the cutting Operations. Grade 32 is blended with Sulphurized Fat and inactive Sulphur.

 

 

EASTO FIN (OILINESS TYPE): These are straight cutting fluids (OILNESS TYPE) blended from refined base Stocks containing Fatty Oil & Sulphur to impart extreme pressure properties. These oils are used without any dilution. These oils impart wetting properties & increase life of Tool & Production.

EASTO FIN (NON-STAINING TYPE): These are straight cutting Fluids (OILNESS TYPE) blended from refined base stocks containing Fatty Oil & Sulphur to impart extreme pressure properties. These oils are used without any dilution. These oils impart wetting properties & increase life of Tool & Production.

EASTO FIN (STAINING TYPE):  These are straight Cutting Oils (STAINING TYPE) Containing Active Sulphur.

EASTO METALKUT SNC: This is a Active Type of Neat Cutting Oil and contains Suplhurized Fatty material and free Sulphur to give better Surface Finish and longer Cutting Tool life over a large variety of Cutting Operations.

EASTO METALHONE:  This is a Honing Oil with excellent Lubricity Characteristics. It is extra light in Viscosity to ensure quick and through Flushing Action of any material. This Oil ensures very good surface finish and increases the life of the Honing Stone.

Straight Cutting Oil is Used in Machine Tool Industries Applications as below:

Vertical Machining Centres, Guiding, CNC Machining Centre, CNC rotating tool holder, Ball Bar Test, Punching, Angle Shearing, Flat Shearing, Notching, Bar Shearing, Conventional Lathe, CNC engraving and milling machine, Radial drilling machine, Nut former machine, CNC Flexible Horizontal machining centre, CNC/Conventional, Fine Boring, Line Boring, Rotary indexing, Valve seat Generation & Gun Reaming, Multi-spindle drilling, Milling, Head changers, Internal spline Broaching, Gear Chamfering, Surface Broaching, Machine lines for Cylinder Block & head, Connecting Rod, CNC Turning, CNC boring, facing and drilling machine, Hydraulic punching and shearing machine, Hydraulic Press, Hydraulic power pack - for Hydraulic Oils, CNC Gear Tooth Grinding, Knurling Tool wheels, Knives - circular, friction saw blades, segmental saw blades, Dyes and mould, Forming tools, Honing machine, Gun drilling machine, Multi – Spindle Drilling, Milling, Head Changes, EDM, CNC centering and facing machine, Honing machine, horizontal, Fine boring machine, Cold define machine, CNC double column Plano drilling machine

Send Enquiry

Download PDS
Download Brochure
Download Brochure


We are leading in:

Best quality Cutting Oil, High grade Cutting Oil, leading manufacturers of Cutting Oil, leading suppliers of Cutting Oil, leading exporters of Cutting Oil.

Manufacturers, exporters, and suppliers of Cutting Oil, High grade Cutting Oil from India in the middle east countries i.e. Egypt, Iraq, Israel, Kuwait, Morocco, Oman, Qatar, Saudi Arabia, Turkey, United Arab Emirates; African countries i.e. Egypt, Nigeria, South Africa, Ethiopia, Kenya, Ghana; Far East Asian countries Mongolia, Korea, Thailand, Philippines, Malaysia, Myanmar also in Southeast Asia, North America, Europe and Australia, USA, Canada.

DISCLAIMER: The information given here is considered to be correct & is offered for your consideration, investigation & verification. No Warranties are expressed or implied, since the use of products are beyond our control.